EasyManua.ls Logo

Extron electronics ShareLink Pro 500 - Page 53

Extron electronics ShareLink Pro 500
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ShareLink Pro 500 • SIS Configuration and Control 46
Unsolicited Responses
Response
(Device to Host)
Description
Input selection and status
Pips1]
Pips0]
In1]
In0]
In00•X@]
Reconfig]
HDMI window input is selected.
HDMI window input is de-selected.
HDMI pass-through input is selected.
HDMI pass-through input is de-selected.
HDMI input signal presence changed.
Change of the input frequency.
Detected format changed
Vtyp1*X$]
Detected video format changed.
HDCP status
HdcpIX1$]
HdcpOX1$]
Change in the HDCP status of the HDMI input.
Change in the HDCP status of the HDMI output.
Hot plug
HplgO]
Hot plug occurs on the local HDMI output.
Total number of users
connected
SharKX7$]
Unsolicited response sent upon detection of the following:
A new user has connected to the ShareLink Pro.
A connected user has disconnected from the ShareLink Pro.
User changes
UserChg]
Unsolicited response sent upon detection of the following:
A connected user has started sharing content.
A connected user has stopped sharing content.
A user is requesting to connect to the ShareLink Pro (in
moderator mode only).
A connected user is requesting to share content (in moderator
mode only).
Volume changes
VolX2#]
Change in audio volume level.
KEY:
X@ = Input signal
0 = No input signal detected 1 = Input signal detected
X$ = Video format
0 = No signal
1 = DVI
2 = HDMI
X1$ = HDCP status
0 = Not connected
1 = Not HDCP Encrypted
2 = HDCP Encrypted
X2# = Volume adjustment range
-100 to 0 = (default is -30 dB)
X7$ = Total number of users connected (integer – maximum 64)

Related product manuals