EZ-ACCESS PATHWAY User Manual

PATHWAY
®
Aluminum Wheelchair Ramp Kit Assembly Manual Page 3 of 40
1
WARNINGS, CONT’D.
Aluminum conducts electricity. Do not use the system during electrical storms or in proximity to
damaged or exposed wiring.
Properly support and restrain the system in transit or storage.
For additional care, usage, or general safety information, please call 1-800-451-1903.
TOOLS AND HARDWARE TYPICALLY REQUIRED
✓ 1/2” SOCKET OR 1/2” WRENCH
✓ BOX KNIFE
✓ 9/16” SOCKET OR 9/16” WRENCH
✓ HAMMER
✓ 5/16” SOCKET OR 5/16” WRENCH
✓ LEVEL
✓ POWER DRILL
✓ FILE
✓ #2 PHILLIPS SCREWDRIVER
✓ RUBBER MALLET
✓ PLIERS
✓ 1/4” MASONRY DRILL BIT (IF INSTALLING TO CONCRETE)
✓ 1/8” DRILL BIT
✓ DIGGING TOOLS (IF AN OBSTACLE NEEDS TO BE REMOVED)
✓ 5/16” DRILL BIT
✓ HACKSAW
✓ 5/32” ALLEN WRENCH
✓ 25’ TAPE MEASURE
✓ 3/16” ALLEN WRENCH
✓ CONSTRUCTION ADHESIVE

EZ-ACCESS PATHWAY Specifications

General

Brand	EZ-ACCESS
Model	PATHWAY
Category	Lifting Systems
Language	English