4. Appendix B - Export log files
There are two ways to export your log files:
1. The first way is:
• Power on the system
• Insert a non-bootable USB stick
• Press the Utilities button
• Press the Maintenance button
• Press the Export log button
2. The second way is:
• Power off the system
• Unplug the power supply cable and the battery
• Plug the power supply and the battery again
• Insert a non-bootable USB stick
• Boot the system
• Wait for a one minute and then unplug the USB
• Power off the system
• Autologs should be saved on the USB stick
• Please verify that Autologs are on the USB stick
• Send the Autologs to service@ezono.com for investigation
• If Autologs cannot be created please contact service@ezono.com
Version: 1.1 © eZono AG, 2009-2015 - Confidential Page 22 of 25
To Next Page
Loading...