OSB – Operation Summary Bit:
If any of the bits in the OPERATION EVENT register set, and their respective enable bits are set, the Operation Summary Bit (OSB) will set.
ESB – Event Summary Bit:
If any of the bits in the STANDARD EVENT register set, and their respective enable bits are set, the Event Summary Bit (ESB) will set.
QSB – Questionable Summary Bit:
If any of the bits in the QUESTIONABLE EVENT register set, and their respective enable bits are set, the Questionable Summary Bit (QSB)
will set.
MSB – Measurement Summary Bit:
If any of the bits in the MEASUREMENT EVENT register set, and their respective enable bits are set, the Measurement Summary Bit (MSB)
will set.
EAV – Error Available:
This bit sets any time there is an error message available in the error buffer.
RSQ – Request for Service:
If any of the other bits in the STATUS BYTE are set, and their respective enable bits are set in the STATUS ENABLE register, the Request for
Service (RQS) will set.
To Next Page
Loading...
Need help?
General
