FAAC B614 - Fixing the Cables Inside the Barrier

14
13
B614 20 732998 - Rev.A_DRAFT
1
2
4
1
1
2
3
Translation of the original instructions
ENGLISH
FIXING THE CABLES INSIDE THE BARRIER

130 cm of cable are necessary.
1. (13) Arrange the cables inside the barrier. Fix
the cables with the cable ties provided 1, 2 and 3.
2. (14) Remove bolt with washer 1. Open cable
tie2. Bring the cables to the board.
3. Use the screw and washer 1 to close the cable tie.

The electrical connections must be made after completing
the mechanical installation