FAAC B614 - Beam Lights; Integrated Flashing Light; Battery XBAT 24; Radio Module XF

41
42
B614 36 732998 - Rev.A_DRAFT
PE
N
L
N
L
6 A
AC MAIN
J1
XF 433-868
J8
J7
Translation of the original instructions
ENGLISH
BEAM LIGHTS
See § 10.5 and § 10.6 for the connection.
INTEGRATED FLASHING LIGHT
See § 10.6 for the connection.
BATTERY XBAT 24
See § 10.2 for the connection.
RADIO MODULE XF
See § 10.3 for the installation.
MAINS SUPPLY AND EARTHING

Use a 3G 1.5 mm
2
wire (not supplied).
!
The grounding between board and box is done in the
factory. Do not remove the connection.
1. Crimp the earth wire of the power cable to the
cable terminal provided.
2. (42) Insert 2 washers, the cable terminal and
the nut provided on the earth plug respecting the
insertion order.
3. Tighten the nut.
4. Connect the phase wires and neutral to J1.