FAAC B614 - Closing the Upper Lid

34
B614 30 732998 - Rev.A_DRAFT
2
1
Translation of the original instructions
ENGLISH
5.11 CLOSING THE UPPER LID

If there is a head lighting kit, insert the connector before
closing the cover (see § 10).
1. (34) With the cover inclined, insert markers 1
in slots 2 on the box (rod side), then lower it on
the opposite side.
2. Close with the key: turn in an anticlockwise direc-
tion.
3. Check the closure of the cover: try to lift it from
the two beam ends at the same time and then on
the opposite side.

For the seal of the closure it is necessary for the door of
the barrier to be closed and fixed definitively.