Facom Beissbarth microtec 740 - 6 Selecting the Balancing Method

Mt740/745, 741/746/En/Rev. 002/12/97 * 901.742 002
BEISSBARTH MT 740/ 745, 741/ 746
6-1
SELECTING THE BALANCING METHOD
1. Key for drive- on weights (4) for steel rims.
2. Key for adhesive weights (6) with concealed
weight for alloy rims.
3. K ey for adhesive weights (6) with concealed
weight for alloy rims
Multifunction key for weight positioning
(7, motorcycle key).
4. Press once: for weights positioned
centrally (purely by static methods)
5. Press twice: drive-on weight on outside of
rim flange and adhesive weight on inside
6. Press three times: adhesive weight on
outside of rim flange and drive-on weight
on inside
7. Press four times: concealed adhesive
weight on outside of rim flange and drive-
on weight on inside
8. Press five times: for CTS rims (Cinti tyre
system).
Note:
Balancing position
If this balancing position is not
possible, residual imbalance is to
be expected and rebalancing will
probably be necessary.