FADAL VMC 3020 - Parameters and Coolant; R Parameter Table; Coolant Control

October 2000 Fadal/Sinumerik 810D CNC: Definition of Offsets 53
SIEMENS CONTROL
Operator Manual
Fadal
R Parameter Table
Displays the user defined R parameters that can be activated by the
program.
Coolant; Using the Coolant 1 and Coolant 2 Buttons
The coolant buttons can be used to turn the coolant on and off.
1) When the flood coolant is off, press the COOLANT 1 button to
turn the flood coolant on.
2) When the flood coolant is on, press the COOLANT 1 button to
turn the coolant off.
1) When the mist coolant is off, press the COOLANT 2 button to
turn the mist coolant on.