22 Fadal/Sinumerik 810D CNC: Jog Modes Of Operation October 2000
SIEMENS CONTROL
Operator Manual
Fadal
3) With the blue cursor keypad arrows, cursor down to the variable
increment box, type in the new value and press INPUT hard key.
This will allow the user to set the jog increment value.
Using MPG hand wheel
1) Press the MPG hard key button.
The LED comes on.
2) To move the tool in a plus
direction, turn the manual pulse
generator in the clockwise
direction.
3) To move the tool in a minus
direction, turn the manual pulse
generator in the
counterclockwise direction.
4) The OVERRIDE button is used to override the door interlock,
when using the MPG.
Cursor Keys
To Next Page
Loading...
