Fagor DDS - Page 196

Auxiliary modules
204
4.
AUXILIARY MODULES
External Ballast resistors
196
DDS
HARDWARE
Ref.1310
Thermostats associated with external resistors. Technical data
All external Ballast resistors currently available in the FAGOR catalog
come with a thermostat. They are classified as:
and their technical characteristics are:
Thermostat Reference of the external Ballast resistor
Internal
ER+TH-18/1800, ER+TH-18/2200
ER+TH-18/1000+FAN, ER+TH-18/1500+FAN,
ER+TH-18/2000+FAN
External ER+TH-24/750, ER+TH-24/1100, ER+TH-18/1100
Internal thermostat
Contact person Normally Closed
Contact opening temperature 160 °C (320 ºF) ± 10%
Rated voltage 250 V AC
Rated current 2 A
Wire section 0.25 mm²
External thermostat
Protection degree IP 20
Contact person
Normally Closed
Contact opening temperature 200 °C (320 ºF) ± 10%
Rated voltage 250 V AC
Rated current 2.5 A
Wire section 0.25 mm²
F. H4/6
External thermostat.