WAN/LAN
link light
does not
shine
2
、
Check the card is working properly, the specific
approach is seen in the PC, there with "?" Or "!" Device
under "Network Adapter". If so, remove the device and
reinstall. Otherwise, the NIC in another slot, if not
enough, replace the card.
Can not
access the
internet
Access modes commonly used example (already
installed on your computer dial-up software)
Description:
1、Make sure the front of the problem does not exist.
2、Make sure that dial-up software is properly installed
and set.
3、Sure to enter the correct user name and password.
4、If it does not work after the success dial up, make sure the
IE browser's proxy server is set correctly.
5、Please try to log multiple pages to confirm a Web
server failure is not due.
50
To Previous Page
Loading...
