5.3.1.2. Wizard
Wizard
Field Name Explanation
Please select the proper network mode according to the network condition.
A1 gateway provide three different network settings:
z Static: If your ISP server provides you the static IP address, please select
this mode, and then finish Static Mode setting. If you don’t know about
parameters of Static Mode setting, please ask your ISP for them.
z DHCP: In this mode, you will get the information from the DHCP server
automatically; need not to input this information artificially.
z PPPoE: In this mode, your must input your ADSL account and password.
You can also refer to 3.2.1 Network setting to speed setting your network.
Choose Static IP MODE，click【NEXT】can config the network and SIP(default
SIP1)simply, also can browse too. Click【BACK】can return to the last page.
Static IP Address Input the IP address distributed to you.
Netmask Input the Netmask distributed to you.
Gateway Input the Gateway address distributed to you.
DNS Domain Set DNS domain postfix. When the domain which you
input can not be parsed, gateway will automatically add
this domain to the end of the domain which you input
before and parse it again.
Primary DNS Input your primary DNS server address.
Alter DNS Input your standby DNS server address.
To Next Page
Loading...
