5.3.2. Network
5.3.2.1. WAN Config
WAN Config
Field Name explanation
Active IP The current IP address of the gateway.
Current Netmask The current Netmask address.
MAC Address The current MAC address of the gateway.
Current Gateway The current Gateway IP address.
Get MAC Time Shows the time of getting MAC address
Please select the proper network mode according to the network condition.
A1 gateway provide three different network settings:
z Static: If your ISP server provides you the static IP address, please select
this mode, and then finish Static Mode setting. If you don’t know about
parameters of Static Mode setting, please ask your ISP for them.
z DHCP: In this mode, you will get the information from the DHCP server
automatically; need not to input this information artificially.
z PPPoE: In this mode, your must input your ADSL account and password.
You can also refer to 3.2.1 Network setting to speed setting your network.
Obtain DNS
server
automatically
Select it to use DHCP mode to get DNS address, if you
don’t select it, you will use static DNS server. The
default is selecting it.
To Next Page
Loading...
