• Do not make the working platform larger with unauthorised platform
extensions or additions.
• If the extending structure or the work platform remains jammed so
that one or more wheels are lifted from the ground, the operator is
required to climb off the working platform before attempting to free
the machine. Use a crane, forklift trucks or other adequate
equipment to stabilise the machine and allow the personnel to get
off the work platform.
• Do not move the machine with the stabilisers inserted and the
extendible structure lifted. Before moving the machine, completely
lower the extending structure.
Crushing and impact hazard
• When using the machine or lifting or lowering the work platform,
check the distances above, at the sides and below the platform.
• Do not lean over the rails of the work platform when the machine is
in operation.
• Always pay the utmost attention to prevent the operational controls
and people on the work platform from being hit or hindered by any
obstacles.
• Ensure the operators of other machines at a height or at ground
level are informed of the presence of the machine.
• Warn personnel not to work, stand or walk underneath the lifted
platform. Mark off the floor area with appropriate barriers, as
required.
To Next Page
Loading...