TRANSPORT AND LIFTING PROCEDURES
General information
It is possible to transport the machine to the work premises using one of the
following methods:
• By driving the machine along the route on its base wheels, if the surface
it is travelling on permits it
• By lifting it with the special belts (check the gross weight of the machine
in the Operational Technical Data Table of the machine)
• By moving it with a forklift (check the gross weight of the machine in the
Operational Technical Data Table for the machine)
• Using the special manual loading system, supplied optionally, to quickly
load onto the transport vehicle.
ATTENTION
LOAD THE MACHINE ONTO A HEAVY DUTY VEHICLE HAVING A USEFUL
LOAD CAPACITY SUITED FOR THE TOTAL WEIGHT OF THE MACHINE (CHECK
THE GROSS WEIGHT OF THE MACHINE IN THE OPERATIONAL TECHNICAL
DATA TABLE)
To Next Page
Loading...