Faraone ZP8 - Platform Control Desk

USE AND MAINTENANCE MANUAL - SECTION 4
AERIAL PLATFORM ZP – Rev. 05_2018
Page 4-9
PLATFORM CONTROL DESK
1. Emergency stop/switch-off button
2. Ascent control button
3. Descent control button
General information
Before actuating the machine from the control console of the work platform,
it is necessary to satisfy the following conditions of the controls:
• Ground control station – The main power supply switch must be
switched on.
• Ground control station - The Emergency stop/switch-off button must
be in RESET position (POWER SUPPLY CONNECTED).
• Work platform desk - The emergency stop/switch-off button must be
in RESET position (POWER SUPPLY CONNECTED).
2
3
1