TOWING, LIFTING AND TRANSPORT
• Do not allow personnel to stand on the work platform while towing, lifting
and transport.
• Only tow the machine in case of emergency, faults, a power-cut or to
load/unload it. Refer to the "Emergency procedures" section in this
manual.
• Before towing, lifting and transport, ensure the work platform is
completely retracted and emptied.
• Do not pull or push a blocked or disabled machine.
• While lifting the machine by means of a forklift, place the forks
exclusively in the appropriate areas of the machine. Lift by means of
lifting equipment of adequate capacity.
For information regarding lifting, refer to the relevant section in the manual.
To Next Page
Loading...