BASIC CONSTRUCTIVE DATA
MACHINE FRAME: The frame of the machine (called base) is entirely
constructed with rectangular section, galvanised iron profiles. All essential
components for normal machine operation in stable conditions are installed
on the frame.
EXTENDING MAST: The extending structure consists of special extruded
aluminium alloy profiles that slide along each other on runners with nylon
wheels. The kinematic connection between one profile and another is
achieved with chains.
An oil hydraulic cylinder is installed between the first and second profile,
powered by the hydraulic unit, to lift the structure. The chains interconnect
the extending structure elements so that they lift simultaneously.
WORK PLATFORM: The work platform is completely constructed in
extruded aluminium profiles. The tread floor consists of aluminium plate lined
with non-slip casing.
EXPOSURE TO VIBRATION: The machine does not produce vibrations
such as to endanger the health of the operators. The weighted acceleration
to which the entire body is subjected to is less than 0.5 m/s
2
ACOUSTIC EMISSIONS: The A-weighted emission sound pressure level is
below 70dB
To Next Page
Loading...