Battery charging procedure
1. Park the machine in a well-ventilated area, near an AC electric
socket;
2. Switch the machine off and remove the key from the door of the
ground controls to prevent unauthorised use.
3. Connect the battery charger to a correctly installed and earthed
socket according to regulations in force.
Battery charge warning lights
The battery charge status lights are next to the batteries unit installed on the
machine.
The RED LED, when charging the battery, indicates the beginning of the
charging cycle.
Charging stops automatically with no need for operator action and is
indicated by a GREEN LED on.
While using the machine, battery charge will change from fully charged
(indicated by the green LED), to partially charged (indicated by the orange
LED) to low battery (indicated by the red LED).
Carry out the following operations carefully:
✓ Charging must be carried out in a well-ventilated area, where it is
forbidden to smoke and use naked flames;
✓ It is recommended to avoid using any possible source of sparks near
charging batteries;
✓ It is recommended to use anti-static clothing;
✓ Do not lift or tilt the batteries;
✓ Do not attempt to start the machine;
To Next Page
Loading...