ATTENTION
BEFORE LIFTING THE WORK PLATFORM, PAY ATTENTION TO WHAT IS
STATED IN SECTION 3 “PREPARATION AND INSPECTION” WITH REGARD TO
THE BASE LEVELLING CONTROL SYSTEM.
ATTENTION
BEFORE STARTING THE MACHINE, INSERT THE STABILISERS IN THE
APPROPRIATE SEATS (UNTIL THEY STOP) AND LEVEL THE BASE BY
ADJUSTING THE STABILISER'S FEET. PAY CAREFUL ATTENTION WHEN
SLIGHTLY LIFTING THE MACHINE'S WHEELS SO THAT THEY REST ONLY ON
THE STABILISER'S FEET.
ATTENTION
TO PREVENT UNAUTHORISED PERSONNEL FROM USING THE MACHINE'S
GROUND CONTROL, WHILST THE OPERATOR IS INSIDE THE WORK
PLATFORM AT A HEIGHT, BEFORE CLIMBING INSIDE HE/SHE MUST CLOSE
THE ACCESS DOOR TO THE GROUND CONTROLS, REMOVE THE KEY AND
STORE IT IN A SAFE PLACE
(THE KEY CAN BE GUARDED BY A SECOND OPERATOR, IF PRESENT, WHO
REMAINS ON THE GROUND, OR HE/SHE CAN TAKE IT WITH HIM/HER INSIDE
THE WORK PLATFORM).
To Next Page
Loading...