(f) Batteries (if present)
If necessary, charge them;
(g) Cage assembly and entrance doors
Correct blocking of the cage and entrance doors operating correctly;
(h) Control console in the cage
Controls secured, legible signs, emergency stop switch in the reset
position and legible control signs;
(i) Ground control station (if present)
Main power supply selection switch operable, signs securely fastened
and legible, emergency stop switch operable;
(j) Extendable structure unit
Structure profiles, sliding inserts, chains, sequential activation cables,
pulleys able to turn freely;
(k) Spirit levels (if present)
Check the integrity of the spirit levels on the base frame.
ATTENTION
DO NOT USE THE MACHINE BEFORE REPAIRING ALL FAULTS /
MALFUNCTIONS NOTED
To Next Page
Loading...