Fayat Group Dynapac CA30D - Introduction; The Machine; Intended Use; Training

Introduction
10 4812134740EN 01-06-2022
Introduction
The machine
Dynapac CA30D is a single drum roller in the 11 tons class
respectively, with a useful drum width of 2130 mm. They are
available in D (Smooth drum) and PD (padfoot) version.
Intended use
CA30D is commonly for compaction during work on road
construction, airports, ports, and industrial areas, etc. It is
available with a smooth drum or padfoot shell assembled on
Drum or padfoot drum.
The cab and safety-related accessories are described
in this manual.
Training
The purpose of operator training is to impart the
operator the knowledge and skills necessary for
proper operation and routine maintenance of the roller
according to this manual.
Note to trainer: Further information on operator training can be
found in ISO 7130.
Warning symbol.
WARNING! Identifies a dangerous or risky
procedure that could lead to danger to life or
serious damage, if ignored.
CAUTION! Identifies a risky procedure that could
lead to damage to machine or property, if
ignored.
Safety information
The Safety Manual supplied with the
machine must be read by all roller operators.
Always follow the safety instructions and do
not remove the manual from the roller.
We recommended that the operator carefully
reads the safety instructions in this manual
and follows these instructions. Make sure
that the manual is always available.
Read the entire manual before starting the
machine and before carrying out any
maintenance.