EasyManua.ls Logo

Fayat Group Dynapac CA30D - Technical Specifications - General; Tire Water Blasting Procedure

Fayat Group Dynapac CA30D
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications General
01-06-2022 4812134740EN 28
Technical specifications General
Engine
Manufacturer/Model
Cummins F 3.8
Turbo diesel
engine,
water-cooled
Power (SAE J1995)
100
kW
134
hp
Engine speed, idling
900
rpm
Engine speed, loading/unloading
1,600
rpm
Engine speed, working/transport
2,200
rpm
Electrical system
Battery
12V
180Ah
Alternator
12V
135A
Fuses
See section “Electrical system” – fuses
Tire
Tire dimensions:
Tire pressure
Std type
23.1 x 26.0 8 ply
110 kPa (1.1 kp/cm
2
) (16psi)
The tires filled with fluid (up to 395 kg/tire).
When doing tire maintenance, pay attention
to their condition.
Tire Water Blasting procedure
Jack the Roller and turn the tire to bring the valve
to the top position.
Remove the valve core housing and make
connection with tire blasting pump and fill the
water with Cacl2 solution 395 lits per tire.
Set the final working press (110kpa-16psi) after
unjack the roller in valve position in bottom side.
Tyre blasting must in bead seating with
control pressure & valve position in up
position.

Table of Contents

Related product manuals