Fayat Group Dynapac CA30D - Machine Plate - Identification; Product Identification Number on Frame

Machine description – Stickers
01-06-2022 4812134740EN 33
Machine plate – Identification
1. Product plate - Product Identification Number (PIN), model/type designation
2. Engine plate - Type description, product and serial numbers
3. Cab/ROPS plate - Certification, product and serial numbers
4. Component plate, rear axle - Product and serial numbers
5. Component plate, drum - Product and serial numbers
Product identification number on frame
The machine’s product identification number (1) is punched on
the right side of the front frame.
Fig. Front frame
1. PIN
Fig. Front frame
1. PIN
1
2
5
1,2

