14 4812134740EN 01-06-2022
14. Before repair or service:
- Chock the drums/wheels.
- Lock the articulation if necessary.
- Please block under overhanging equipment, such as strike-off blade, edge
cutter/compactor or chip spreader
15. Hearing protection is recommended if the noise level exceeds 80 dB(A). The noise
level can vary depending on the equipment on the machine and the surface the
machine is being used on.
16. Modifications to the roller, including the use of any attachment/equipment, not
approved by Dynapac that might compromise safety (including visibility) are not
allowed. Any modifications are only to be made after written approval has been
given by Dynapac.
17. Avoid using the roller before the hydraulic fluid has reached its normal working
temperature. Braking distance can be longer than normal when the fluid is cold.
18. If the machine seems to be responding abnormally during travel, stop and check
it.
19. For the operator’s protection, use:
- A helmet;
- Working boots with steel toecaps;
- Hearing protection;
- Reflective clothing/reflective vest;
- Working gloves.
To Next Page
Loading...
