Fayat Group Dynapac SD2500C - Page 147

D 11 53
Item Designation Brief description
71
Tamper
(screed-specific)
Button with detent switch function and LED feedback:
- Tamper ON and OFF function.
- Activation is carried out by swivelling the drive
lever out.
- Switch OFF by pressing the button again.
A
The main function switch must be set to the
OFF position.
A
The function is preset in conjunction with
the "Set-up mode" button.
72
Vibration
(screed-specific)
Button with detent switch function and LED feedback:
- Vibration ON and OFF function.
- Activation is carried out by swivelling the drive
lever out.
- Switch OFF by pressing the button again.
A
The main function switch must be set to the
OFF position.
A
The function is preset in conjunction with
the "Set-up mode" button.