Fayat Group Dynapac SD2500C - Engine Speed menu; Engine measured value display

D 22 14
"Engine Speed" menu / Engine measured value display
Menu for adjusting the engine speed and for checking various measured values of
the engine.
- (1) Nominal speed display and adjustment parameters
A
Adjusted directly by pressing the job dial.
A
Adjustment is carried out in steps of 50; the engine speed is adapted directly.
- (2) Actual engine speed
- (3) Engine oil pressure (bar)
- (4) On-board voltage (V)
- (5) Engine coolant temperature (°C) / (°F)
- (6) Engine operating hours (h)
- (7) Fuel consumption (l/h) (o)
Open the following sub-menus:
- (8) "Material Management" measured value display.
- (9) "Screed Heater" adjustment and display menu. (o)
- (10) "Paving Area / Automatic Steering Unit" menu. (o)
- (11) "Front wheel drive" measured value display. (o)
- (12) "Particulate filter regeneration" menu. (o)
2
3
5
6
7
4
1
8
9
10
11
12