D 22 42
2 Terminal error messages
Status, warning and error messages symbols
Command Symbol in the display
- High beam headlights control
The high beam headlights are switched on.
f
Avoid dazzling the oncoming traffic!
- Check direction of travel indicator
Flashes whenever direction of travel indicator
is activated.
- Particulate filter indicator lamp.
Particulate filter regeneration is necessary.
- Indicator lamp on permanently: Urgent mainte-
nance, level I. Particulate filter regeneration
must be carried out as soon as the operating
status of the vehicle permits.
- Indicator lamp flashes: Urgent maintenance,
level II.
Particular filter regeneration must be carried out
as soon as possible.
The engine output may be automatically reduced
under certain circumstances.
- Indicator lamp flashes + indicator lamp "Engine
malfunction" is on permanently: Urgent mainte-
nance, level III. Particulate filter regeneration is
vitally necessary to avoid subsequent damage
and repairs.
The engine output is automatically reduced.
- Indicator lamp goes off + indicator lamp "Engine
malfunction" is on permanently: Particulate filter
regeneration is no longer possible.
m
Operation must be stopped immediately.
- Consult the Atlas Copco Service Department
A
see "Particulate filter regeneration" menu
To Next Page
Loading...
