D 22 43
Command Symbol in the display
- Indicator lamp automatic particulate filter re-
generation - deactivated
Particulate filter regeneration is deactivated.
- Automatic regeneration should only be deacti-
vated if the operating status of the paver finish-
er does not permit any automatic function.
A
see "Particulate filter regeneration" menu
- Warning - high exhaust gas temperature!
(HEST)
The indicator lamp indicates a high exhaust gas
temperature!
A
It is normal for the indicator lamp to go on
and off during operation while the exhaust
gas system is being cleaned by the engine.
f
Keep the outlet of the exhaust pipe out of the
reach of people and of objects that can burn,
melt or explode!
f
There may not be any people or objects with-
in a radius of 0.6 m of the exhaust outlet!
f
There may not be any objects or substances
that can burn, melt or explode within a radius
of 1.5 m. (petrol, wood, paper, plastic, tex-
tiles, pressurised cylinders, hydraulic lines).
A
In an emergency, turn the engine off so that
no more exhaust gas is emitted!
- Indicator lamp AdBlue
®
/ DEF
The level of AdBlue
®
/ DEF is insufficient.
Level 10% - display flashes
Level 5% - display stays on permanently
Level 0% - drive engine is throttled to
emergency mode
- Indicator lamp platform lock.
The control platform lock is set.
To Next Page
Loading...
