Fayat Group Dynapac SD2500C - Page 177

D 22 5
Example: Adjusting the screed temperature
- The "Home" menu is open in the display.
- Press button (A) to open the "Engine Speed" menu.
- The "Engine Speed" menu is open in the display.
- Press button (B) to open the "Screed Heater" menu.
- Turn jog dial (C) to make the cursor appear.
A
A blue frame appears around the temperature parameter.
- Press jog dial (C) to activate the adjustment.
- Turn jog dial (C) in the corresponding direction to reach the required temperature.
- Press jog dial (C) to adopt the adjusted value.
A
The blue frame around the temperature parameter disappears.