D 22 20
A
Automatic regeneration takes place during normal operation without the operator no-
ticing. However, it does cause a higher exhaust gas temperature.
A
If the current paving situation or surroundings do not permit automatic regeneration,
then the function can be disabled:
- (2) Disabling/enabling automatic particulate filter regeneration.
- For disabling/enabling automatic triggering of particulate filter regeneration.
A
When the disabling function is activated, the corresponding warning sign appears (2a).
A
Automatic particulate filter regeneration can occur immediately after being enabled again.
Danger from particulate filter regeneration
Improper particulate filter regeneration can cause severe to
fatal injuries!
- Keep the outlet of the exhaust pipe out of the reach of peo-
ple and of objects that can burn, melt or explode!
- There may not be any people or objects within a radius of
0.6 m of the exhaust outlet!
- There may not be any objects or substances that can burn,
melt or explode within a radius of 1.5 m. (petrol, wood, paper,
plastic, textiles, pressurised cylinders, hydraulic lines).
- In an emergency, turn the engine off so that no more
exhaust gas is emitted!
- Comply with all further information in these instructions
and in the engine operating instructions.
To Next Page
Loading...
