D 22 47
Command Symbol in the display
- Engine stop:
Display for all error messages with machine stop.
- Hydraulic filter.
The hydraulic filter must be replaced.
A
Replace filter element acc. to Maintenance
Instructions!
- Engine oil pressure
m
The oil pressure is insufficient.
Switch off the engine immediately!
For further possible faults, see Engine's op-
erating instructions.
A
This error is displayed together with
"Error Message".
- Hydrostatic travel drive oil pressure indicator
m
The oil pressure is insufficient.
Switch off the engine immediately!
For further possible faults, see Engine's op-
erating instructions.
- Emergency mode active
- Vehicle error.
The control unit reports one or several malfunc-
tions that cause the vehicle to shut down.
It may be possible to continue operating the vehicle
in the emergency mode.
A
Error details can be viewed in the
"Error Memory" display menu.
- Master display communication error
Communication between master and display
is interrupted / emergency stop button has
been pressed
To Next Page
Loading...
