EasyManua.ls Logo

Fayat Group Dynapac SD2500C - Page 99

Fayat Group Dynapac SD2500C
588 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D 11 5
Item Designation Brief description
10
Emergency stop
button
Press in an emergency (danger to persons, impending colli-
sion, etc.)!
- Pressing the emergency stop button switches off the en-
gine, the drives and the steering system.
Making way, lifting the screed or other actions are then no
longer possible! Danger of accidents!
- The emergency stop button does not shut off the gas heat-
er system (o).
Close the main shut-off valve and the valves on the bottles
by hand!
- To restart the engine, the button must be pulled out again.
11 Ignition lock
To activate the ignition voltage by turning the key.
- Switch off by turning the key back to its starting position.
A
After activating the ignition voltage, the input and display
terminal requires a few seconds for the booting process.
A
On shutting off the vehicle, first switch off the ignition,
then deactivate the main switch.
A
Before the main battery switch is deactivated, a period
of at least 100 seconds must elapse after switching off
the vehicle.
12 Starter
On actuation, the starter is in operation.
All emergency stop buttons (on the operating panel and the
remote controls) must be pulled out.

Table of Contents

Related product manuals