Fellow Kogyo FOCAS-2000 User Manual

15ppm Bilge Alarm
FOCAS-2000
䎃䎃Oil Concentration Detector
Instruction Manual
Read this instruction manual thoroughly before use to operate the product safely by following precautions.
Be sure to keep it in an easy-to-access place so as to refer to it whenever necessary.

Fellow Kogyo FOCAS-2000 Specifications

General

Brand	Fellow Kogyo
Model	FOCAS-2000
Category	Security Sensors
Language	English

Summary

General

1-1. Introduction

Overview of the FOCAS-2000 bilge alarm and importance of the manual.

1-2. Product Features

Highlights key functionalities and design aspects of the FOCAS-2000.

1-3. Safety precautions

Critical safety warnings and guidelines for operating the FOCAS-2000.

Specifications

2-1. Product Specification

Detailed technical specifications of the FOCAS-2000 bilge alarm.

2-2. External dimensions and component names

Visual guide to the FOCAS-2000's physical layout and component identification.

2-3. Internal layout figure and terminal block

Diagram of internal components and terminal block connections for the FOCAS-2000.

2-4. Relay contact output, alarm lamp movement view

Explains relay outputs and alarm lamp behavior under various operating conditions.

Connecting pipes

3-1. Mounting space

Guidelines for installing the FOCAS-2000, including required clearances.

3-2. Precautions for piping work

Important considerations and restrictions for connecting pipes to the FOCAS-2000.

Preparing for Operation

4-1. About items displayed on the screen

Explains various display items and states shown on the FOCAS-2000 screen.

4-2. Outline of operating conditions

Describes the normal operating sequence and conditions of the FOCAS-2000.

4-3. Preparing for Operation

Steps to follow before initial operation, including clock setting and checks.

Operation

5-1. Test-operation method by the Manual operation function

Procedure for manual test operation of the FOCAS-2000.

5-2. Test operation method by the Automatic operation function

Procedure for testing the FOCAS-2000 using automatic operation.

5-3. Function of judging whether the detection tube is clean

Explains how the FOCAS-2000 checks and indicates detection tube cleanliness.

Setting

6-1. Tabulated list of menu items

Overview of FOCAS-2000 menu items, functions, and settings.

6-2. Time correction of the clock (Clock Adjustment)

Step-by-step guide to setting or correcting the internal clock of the FOCAS-2000.

6-3. Various settings (Setting)

Describes how to adjust various operational parameters and settings.

Maintenance and Checking

8-1. Testing function

Lists various test functions available for checking FOCAS-2000 operation.

8-2. Maintenance (Maintenance Mode)

Accesses maintenance functions like washing, zero-point compensation.

8-3. Viewing the operational log

How to view recorded operational logs, alarms, warnings, and errors.

8-4. Cleaning the sensor (brush washing)

Step-by-step guide for cleaning the sensor unit using a brush.

8-5. Cleaning the filter

Instructions for cleaning the filter to maintain performance and prevent clogging.

8-6. Checkup and replacement timing of desiccant (silica gel)

Guidance on inspecting and replacing the desiccant for dew condensation prevention.

8-7. Replacing the clock backup battery

Procedure for replacing the internal battery for clock backup.

8-8. Replacing the operational log memory card

Steps for replacing the memory card used for logging operational data.

8-9. Replacing the fuses

Instructions for safely replacing the fuses to protect the unit.

Troubleshooting

Principal measures against failure

Lists common symptoms, possible causes, and corrective actions for failures.

In the case "Warning" or "Error" is displayed on the LCD display screen

Explains how to handle warning and error messages shown on the LCD.

In the case the other data is displayed on the LCD display screen

Guides on interpreting and resolving specific data displays on the LCD.

Service parts - Option parts

Request

Display of groups and description of statuses