Fellowes Powershred C-320C User Manual

Revised 06/09 C-320/C-320C and C-380/C-380C Technical Service Manual
11
Flowchart A
Shredder does not start
Check switch
for loose wires
Connect any
loose wires
Make sure
shredder is
connected to
power supply
Make sure
power is
available at
wall outlet
Check for loose
internal electrical
connections
Procedure:
Replace
Operator Panel
Board
Replace power
cord, if defective
Replace power
outlet, if
defective
Procedure:
Replace Power
Outlet
Power System
Check sensors,
clean if
necessary
Check for loose
or defective
wires
Replace sensor,
if defective
Procedure:
Replace
Operator Panel
Board
Auto
On/Reverse
Switch
Paper Entry
Sensor
Make sure
disconnect
switch is in
On Position

Fellowes Powershred C-320C Specifications

General

Noise level	62 dB
Basket volume	92 L
Working width	254 mm
Shredding size	3.9 x 30 mm
Shredding type	Cross shredding
Paper shredding	Yes

Weight and Dimensions

Weight	48400 g