Need help?Do you have a question about the Ferroli OMNIA HYBRID C and is the answer not in the manual?
Provides an overview of the OMNIA HYBRID C system, highlighting its integration of heat pump and boiler technologies.
Describes the wired remote controller and its management functions for heating, cooling, and DHW.
Provides detailed performance data for the heat pump under various operating conditions (A7W35, A7W45, etc.).
Explains the crucial procedure for evacuating the refrigerant circuit to remove air and humidity.
Provides instructions and warnings for making electrical connections to the indoor unit.
Configuration parameters for the cooling mode, including temperature limits and compressor settings.
Configuration parameters for the heating mode, including temperature limits and compressor settings.
Provides information for diagnosing and correcting problems related to heat pump operation.
Lists common boiler malfunctions, their possible causes, and corrective actions.
Preliminary checks and procedures required before the initial startup of the heat pump.
Preliminary checks and procedures required before the initial startup of the boiler.
Provides essential safety precautions and general rules for performing maintenance work.
Procedures for replacing key boiler components like the gas valve and heat exchanger.
Safety, handling, and first-aid information regarding the R410A refrigerant.
To Next Page
General