39
EN
Cod. 3541T090 - Rev. 00 - 06/2019
REMOTE CONTROLLER - USER MENU
SET
C
27
21: 55 08 - 08 - 2015 SAT.
ON
MAIN
A
SET
c
ON
ROOM
21: 55 08 - 08 - 2015 SAT.
A
ON/OFF
ON/OFF
SET
c
ON
ROOM
21: 55 08 - 08 - 2015 SAT.
A
ON/OFF
ON/OFF
25
27
SCROLL
ADJUST
SCROLL
ADJUST
fig. 58 -
7.7 Adjusting space operation mode (HEAT/COOL/AUTO)
■ Adjusting space operation mode by interface
Go to ‘’MENU’’ > ‘’SPACE OPERATION MODE’’ . Press”OK”, the page will appear:
Operation mode setting:
OPERATION MODE
SCROLLCONFIRM
OK
COOL
AUTO
A
HEAT
fig. 59 -
■ There are three modes to be selected including heat, COOL and AUTO. MODE.
Use the ‘’◄’’, ‘’►’’ to scroll, press ”OK” to select.
If there is only heat(cool) mode, the page will appear:
Operation mode setting:
OPERATION MODE
SCROLLCONFIRM
OK
HEAT
fig. 60 -
■ The operation mode can not be changed
see COOL MODE SETTING on installation ower’s menual.
If you
select…
Operation mode
caldo
Always heat mode
freddo
Always cool mode
The SW automatically, based on the outside air temperature,
decides whether to activate the unit in HOT or COLD mode.
See also paragraph “7.7 Adjusting space operation mode
(heat/cool/AUTO)”.
■ If room thermostat and mode setting are set YES (for more details refer to
paragraph “ ROOM THERMOSTAT (ON/OFF - HEAT/COOL) by digital input”.) the
operation mode of the unit is defined by the room thermostat, if you try to setup the
mode by the remote controller the page will display:
22:20 22-08-2018 SAT
Cool/heat mode is controlled by
the room thermostat.
Please adjust the operation mode
by the room thermostat.
CONFIRM
OK
fig. 61 -
7.8 User menu
È possibile utilizzare il menu utente per leggere e configurare le impostazioni e i
parametri.
From a home page, press ‘‘MENU’’.
Result: The menu structure appear:
MEMU
SERVICE INFORMATION
OPERATION PARAMRTER
FOR SERVICEMAN
OK
SCROLL 1/2
2/2
ENTER
OK
OPERATION MODE
PRESET TEMPERATURE
DOMESTIC HOT WATER(DHW)
SCHEDULE
OPTIONS
CHILD LOCK
fig. 62 -
To navigate in the menu structure
Use’’▼’’ - ‘’▲’’ to scroll