Ferroli OMNIA HYBRID C User Manual

41
EN
Cod. 3541T090 - Rev. 00 - 06/2019
REMOTE CONTROLLER - USER MENU
PRESET TEMPERATURE
SCROLLON/OFF
ECO
MODE
PRESET
TEMP.
COOL MODE LOW TEMP.
HEAT MODE LOW TEMP.
OFF
OFF
WEATHER
TEMP.SET
ON/OFF
PRESET TEMPERATURE
SCROLLON/OFF
COOL MODE LOW TEMP.
HEAT MODE LOW TEMP.
ON
OFF
ON/OFF
ECO
MODE
PRESET
TEMP.
WEATHER
TEMP.SET
fig. 67 -
☞ NOTA
■ WEATHER TEMP. SET have four kinds of curves :
- curves of the high temperature setting for heating mode,
- curves of the low temperature setting for heating mode,
- curves of the high temperature setting for cooling mode,
- curves of the low temperature setting for cooling mode.
If the HEAT mode is set for HIGH TEMPERATURE, for HEAT mode will only be
available climatic curves HIGH TEMPERATURE.
If the HEAT mode is set for LOW TEMPERATURE, for HEAT mode will only be
available climatic curves LOW TEMPERATURE .
If the COOL modeis set for HIGH TEMPERATURE, for COOL mode will only be
available climatic curves HIGH TEMPERATURE.
If the COOL mode is set for LOW TEMPERATURE, for COOL mode will only be
available climatic curves LOW TEMPERATURE.
■ Refer to the paragraph of this manual “COOL MODE SETTING / HEAT MODE
SETTING” in the section “SETUP OF THE SYSTEM” in the Installation and main-
tenance manual.
■ The desired temperature (T1S) can’t be adjusted, when the temperature curve
is set ON.
■ If you press ON the following submenu will appear where you can select a clima-
tic curve from the 8 available (by default the n ° 4 is proposed).
NB are available:
- 8 climatic curves by mode CALDO ALTA TEMPERATURA
- 8 climatic curves by mode CALDO BASSA TEMPERATURA
- 8 climatic curves by mode FREDDO ALTA TEMPERATURA
- 8 climatic curves by mode FREDDO BASSA TEMPERATURA
WEATHER TEMP. SET TYPE:
WEATHER TEMP. SET
SCROLLCONFIRM
OK
123567 84
fig. 68 -
Use ‘◄’’, ‘’►’’to scroll .Press ‘’OK’’ to select.
■ If the weather TEMP.SET is actived,the desired temperature can not be adjusted
on the interface.Press the ‘’▼’’, ‘’▲’’ to adjust the temperature on home page. The
following page will appear:
5:30 08-08-2016 SAT.
Weather temp.set function is
on. Do you want to turn off it?
SCROLLENTER
OK
NO YES
fig. 69 -
Move to “NO”,press “OK” to come back to home page,move to “YES”,press “OK”
to reset the WEATHER TEMP. SET.
ON/OFF
MODO FREDDO BASSA TEMP.
MODO CALDO BASSO TEMP.
OFF
OFF
ON/OFF
ON/OFF
ON
OFF
ON/OFF
SCORRERE
SCORRERE
TEMPERATURE PREDEFINITE
TIPOCURVA
CLIM.
MODO
ECO
TEMP.
PRE.
TEMPERATURE PREDEFINITE
MODO FREDDO BASSA TEMP.
MODO CALDO BASSO TEMP.
TIPOCURVA
CLIM.
MODO
ECO
TEMP.
PRE.
fig. 70 -
ECO MODE
Use ECO MODE is used to save energy during the night .
The ECO MODE function is available only when the unit is working in HEAT
MODE.
If ECO mode is activated, is displayed on the home page
Go to ‘’MENU’’ > ‘’PRESET TEMPERATURE’’ > ‘’ECO MODE’’.
Press ‘’OK’’ . The following page will appear:
Use ''ON/OFF'' to select ON or OFF and use ''▼'', ''▲'' to scroll.
In this row you can see HEAT MODE LOW TEMP. or HEAT MODE
HIGH TEMP. as a function of the T1S parameter setup (LOW or HIGH),
PRESET TEMPERATURE
PRESET
TEMP.
ECO TIMER
START
END
OFF
WEATHER
TEMP. SET
ECO
MODE
HEAT MODE LOW TEMP.
SCROLLON/OFF
ON/OFF
of the HEAT MODE under
the menù FOR SERVICE
-
MAN (refer to the installa-
tion manual).
fig. 71 -
When you press the ON/OFF button is displayed the following page where it is
possible to select one to the 8 weather temperature set.

Ferroli OMNIA HYBRID C Specifications

General

Brand	Ferroli
Model	OMNIA HYBRID C
Category	Heat Pump
Language	English