1. General remarks
8 Festo P.BE-CMMS-FHPP-DN-SW-EN en 1103a
Warning
Errors in parametrisation can cause injury to people and damage to
property.
Enable the controller only if the axis system has been correctly
installed and parametrised.
1.3 Target group
This manual is intended exclusively for technicians trained in control and automation
technology, who have experience in installing, commissioning, programming and
diagnosing positioning systems.
1.4 Service
Please consult your local Festo Service or write to the following e-mail address if you have
any technical problems:
service_international@festo.com
1.5 Important user instructions
Danger categories
This description contains instructions on the possible dangers which can occur if the
product is not used correctly. These instructions are marked (Warning, Caution, etc),
printed on a shaded background and marked additionally with a pictogram. A distinction is
made between the following danger warnings:
Warning
means that failure to observe this instruction may result in serious
personal injury or damage to property.
Caution
means that failure to observe this instruction may result in personal
injury or damage to property.
Please note
... means that failure to observe this instruction may result in
damage to property.
To Next Page
Loading...
Need help?
General
