Festo CMSX Series - TC-Mod − Tight-Closing Mode

Value range Description
0%0.0…100%
Factory setting:0%
Interpolation point with standardised setpoint
value0%
5%0.0…100%
Factory setting:5%
Interpolation point with standardised setpoint
value5%
…
95%0.0…100%
Factory setting:95%
Interpolation point with standardised setpoint
value95%
100%0.0…100%
Factory setting:100%
Interpolation point with standardised setpoint
value100%
Tab. 16
Fig. 22 Interpolation points
9.4.2.3 TC-Mod − Tight-closing mode
Tight-closing mode can be activated with this parameter. If the tight-closing mode is active, the valve
is moved to the end position with the maximum actuating force of the actuator. The tight-closing mode
Commissioning
33Festo — CMSX-...-C-U-F1-... — 2019-09d