Need help?Do you have a question about the Festo CMSH and is the answer not in the manual?
Lists all available documents for the product.
Refers to the product versions this document covers.
General safety guidelines for using the product.
Defines the purpose and application of the positioner.
Specifies requirements for personnel operating the device.
Details the physical components and structure of the product.
Details the product variant CMSH-V-SD and its applicability.
Explains the operation and display interface of the device.
Describes the main functions and features of the CMSH positioner.
Defines the pneumatic initial position of the positioner.
Instructions for mounting the pneumatic manifold block.
Instructions for mounting the positioner on semi-rotary drives.
Instructions for mounting the positioner on linear drives.
How to adjust the position indicator on the CMSH-S.
Details the pneumatic installation procedures for the device.
Details the electrical installation procedures for the device.
Initial steps and requirements for commissioning the CMSH.
Overview of menus and parameters available in the device.
Covers basic settings, parameterization, and device configuration.
Information on the initialization routine for the positioner.
Provides service-related information and reset functions.
Details diagnostic functions and activation of monitoring.
Explains how error messages are shown and allocated to message groups.
Details the representation of messages on the display.
Possible causes and remedies for when no movement is detected.
Causes and remedies for initialization failures related to control parameters.
Causes and remedies for permanent deviations in control.
Causes and remedies for PST start position deviation.
Step-by-step instructions for disassembling the positioner.
Provides general technical specifications for the positioner.
Details pneumatic specifications like operating pressure and ports.
Details electrical specifications for analogue and digital inputs/outputs.
Details ambient temperature, climate class, protection degree, etc.
Lists materials used for housing, window, screws, and seals.
Lists all available documents for the product.
Refers to the product versions this document covers.
General safety guidelines for using the product.
Defines the purpose and application of the positioner.
Specifies requirements for personnel operating the device.
Details the physical components and structure of the product.
Details the product variant CMSH-V-SD and its applicability.
Explains the operation and display interface of the device.
Describes the main functions and features of the CMSH positioner.
Defines the pneumatic initial position of the positioner.
Instructions for mounting the pneumatic manifold block.
Instructions for mounting the positioner on semi-rotary drives.
Instructions for mounting the positioner on linear drives.
How to adjust the position indicator on the CMSH-S.
Details the pneumatic installation procedures for the device.
Details the electrical installation procedures for the device.
Initial steps and requirements for commissioning the CMSH.
Overview of menus and parameters available in the device.
Covers basic settings, parameterization, and device configuration.
Information on the initialization routine for the positioner.
Provides service-related information and reset functions.
Details diagnostic functions and activation of monitoring.
Explains how error messages are shown and allocated to message groups.
Details the representation of messages on the display.
Possible causes and remedies for when no movement is detected.
Causes and remedies for initialization failures related to control parameters.
Causes and remedies for permanent deviations in control.
Causes and remedies for PST start position deviation.
Step-by-step instructions for disassembling the positioner.
Provides general technical specifications for the positioner.
Details pneumatic specifications like operating pressure and ports.
Details electrical specifications for analogue and digital inputs/outputs.
Details ambient temperature, climate class, protection degree, etc.
Lists materials used for housing, window, screws, and seals.
General| Protection class | IP65 |
|---|---|
| Type of control | Pneumatic |
| Ambient temperature | -20 ... 80 °C |
| Media temperature | -20 ... 80 °C |
| Housing material | Aluminum |
| Connection size | G1/4 |
To Next Page
