Festo CP-FB13-E - COM PROFIBUS 3.X

2. Commissioning
2-14
Festo P.BE-CP-FB13-E-EN en 0112e
Icons 2. There are icon files for Festo valve terminals on the CD
ROM to facilitate configuration. Copy the relevant files
into the following directory on your PC or programmer:
– COM PROFIBUS 3.x: ...\COMPB3x\BITMAPS
file: PBFB13CN.BMP
– COM PROFIBUS 5.0: ...\SIEMENS\CPBV50\BITMAPS
file: PBFB13CN.DIB
3. Edit the following fields in the mask “Bus parameter” in
the menu “Configure”:
– Bus profile
– Baud rate
Further information (directories, etc.) can be found in the file
“Readme” in the main directory of the CD ROM.