Festo CP-FB13-E - Test of the Valves

3. Diagnosis
3-7
Festo P.BE-CP-FB13-E-EN en 0112e
3.2 Testing the valves
Warning
Before starting the test:
S Switch off the compressed air supply to the valves.
S If the string assignment has not been saved, save the
current string assignment.
Y o u can thereby avoid:
– undesired or dangerous movements of the actuators
– the need to press the SAVE button again.
Caution
– This test function runs automatically in the CP valve
terminals. All valves will be switched on/off cyclically.
– None of the programmed interlockings or further switch-
ing conditions will be taken into account.
Test routine During the test routine of the CP terminal, all the valves will
be switched on and off at 1-second intervals.