Festo DGP-8 - Page 36

DGP(L)−...−B
Festo DGP(L)−...−B 0609g English
36
10 Repairs
S Make sure that the DGP(L)−... is overhauled only by our repair service.
The repair procedures require very fine adjustments.
11 Accessories
Designation Type
For fastening the DGP(L)−...:
Foot fastening
Profile fastening (centre support)
HP−...
MUP−...
For fastening the work load on the slide:
Centring pins / centring sleeves
Central fastening
Sliding blocks (L for slide)
ZBS−... / ZBH−...
SLZZ−...
NST(L)−...
Groove cover rail (S for sensor groove) ABP−..−(S)
Shock absorber
Shock absorber, any position
YSR−...−C / YSRW−...
KYP−...
Pressure start−up valve
One−way flow control valve
HEL−... / H EM−...
GRL−...
Moveable driver (not for SoftStop or positioning) FKP−...
Proximity switch SME / SMT−8−...
Cross connecting kit for slide HMVK−...
Connecting kit dovetail diagonally on slide
Connecting kit dovetail longitudinally on slide
Connecting kit dovetail on cover
HMAV (for HMP)
HMSV (for SLT)
HAPB
HMVA
Connecting bracket for profile system HMBV
Grease gun with pin−point nozzle 647 958
*)