DGP(L)−...−B
Festo DGP(L)−...−B 0609g English
37
Designation Type
Special grease (free of silicone)
Special grease (free of silicone)
LUB−KC1 from Festo
*)
LUB−RN2 from Festo
*)
*) See Spare Parts Catalogue under www.festo.com
12 Eliminating faults
Fault Possible cause Remedy
Uneven movement of the
slide
One−way flow control valve not
fitted correctly
If possible restrict exhaust
Slide does not come into
stroke end position
Adjusting screw of end position
cushioning completely closed
Open adjusting screw
Faults in position scanning Ferritic parts in the vicinity of the
proximity switch
Use parts made of non−magnetic
materials
Heavy leakage Cylinder is distorted
Seal worn
Fasten the cylinder to a flat base.
Replace worn parts.
yourself with wearing parts kit
by returnig to Festo for repairs
Cylinder does not reach the
desired speed
Air volume not sufficient Increase connection cross−sec
tions; switch volume upstream
High friction or counteracting
force
Select larger drive
To Next Page
Loading...
