Need help?Do you have a question about the Festo DNCB and is the answer not in the manual?
Provides crucial safety warnings and guidelines for performing repairs on the cylinder.
Outlines necessary steps and precautions before commencing cylinder repair work.
Details the process for repairing DNCB cylinders with specific features like cushioning or sensing.
Details how to replace piston rod components, including torque specifications for reassembly.
Guides on properly inserting the piston rod and piston into the cylinder barrel with lubrication.
Describes the steps for reassembling and attaching the bearing and end caps to the cylinder.
Provides crucial safety warnings and guidelines for performing repairs on the cylinder.
Outlines necessary steps and precautions before commencing cylinder repair work.
Details the process for repairing DNCB cylinders with specific features like cushioning or sensing.
Details how to replace piston rod components, including torque specifications for reassembly.
Guides on properly inserting the piston rod and piston into the cylinder barrel with lubrication.
Describes the steps for reassembling and attaching the bearing and end caps to the cylinder.
General| Mounting position | Any |
|---|---|
| Conforms to standard | ISO 15552 |
| Series | DNCB |
| Operating medium | Compressed air |
| Ambient temperature | -20 °C ... 80 °C |
| Piston diameter | 32, 40, 50, 63, 80, 100 mm |
| Bore size | 32, 40, 50, 63, 80, 100 mm |
| Material cylinder tube | Anodized aluminum |
| Material piston rod | Stainless steel |
| Piston seal | NBR |
| Operating pressure | 0.6 bar ... 12 bar |
| Stroke | 25 to 2000 mm |
| Piston rod thread | M10x1.25, M12x1.25, M16x1.5, M20x1.5, M27x2, M36x2 |
To Next Page
