Festo MTR-DCI - Page 52

3. Installation
3−8
Festo P.BE−MTR−DCI−IO−EN en 0606b
· Use the following cable from Festo accessories:
 power cable KPWR−MC−1−SUB−9HC−...
 cable length max. 10 m.
· Connect only one cable shield (control cable or supply
cable) to functional earth (FE).
Plug
Pin Colour
1)
Manual
A1 black (1) MTR−DCI−32/42/52:
MTR−DCI−62:
POWER +24 V DC
POWER +48 V DC
A1
A2
A2 black (2) MTR−DCI−32/42/52/62: POWER GND
2)
1)
Cable colours with power cable type KPWR−MC−1−SUB−9HC−...
2)
The GND connection must not be connected to the housing, the shield or functional earth (FE)!
Tab.3/5: Connecting the power supply to the motor unit