FIBER FOX Mini 6S+ - Chapter 8 Other Functions & Utilities; Data Storage; Display Splice Record; Delete Splice Record

35
Chapter 8 Other Functions & Utilities
8.1 Data Storage
This splicer stores up to 5000 splicing results. Contents of data stored are
dierent depending on splicing mode.
8.2 Display Splice Record
Splicing results stored in the splicer can be displayed.
Select Data Storage Menu and Select Display Splice Record to view.
8.3 Delete Splice Record
Splicing results can be cleared by part or whole.
① Select “Delete Splice Record”, and then input specic number (Start Splice
Record and End Splicer Record) of splicing results to be cleared.
② Select Delete Splice Record and press conrm key to conform. Selected
splicing results are cleared and replaced with following splicing results.
8.4 Cancel Data Storage
If you don’t want to store the records, press the “ON” button in the “Cancel the
data storage” Menu.
8.5 System Setting
This menu is used to change settings in detail, or for an administrator to limit
functions for operator to select or change.