Need help?Do you have a question about the FIBER FOX Mini 6S+ and is the answer not in the manual?
General| Cladding Diameter | 80 - 150 µm |
|---|---|
| Coating Diameter | 100 - 1000 µm |
| Data Output | USB |
| Applicable Fibers | SM, MM, DS, NZDS |
| Splicing Method | Core alignment |
| Return Loss | > 60 dB |
| Arc Calibration Method | Automatic |
| Applicable Sleeves | 60 mm |
| Splice Programs | 10 |
| Tube Heater Programs | 10 |
| Tension Test | 2 N |
| Display | 4.3" color LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Condition | -10°C to 50°C |
General safety guidelines and precautions for using the fusion splicer.
Specific warnings regarding environment, electrodes, disassembly, cables, and fiber handling.
Guidelines for cleaning the splicer, V-grooves, and electrodes using appropriate materials.
Instructions for safely moving and storing the splicer to prevent damage and condensation.
Procedures for unpacking the splicer and connecting its components.
Details how to install and remove the battery for power supply.
Details the steps for stripping, cleaning, and cleaving optical fibers for splicing.
Guides users on opening the shield, positioning fibers, and clamping them for splicing.
Covers selecting splice modes and initiating the splicing operation.
Details the process of using a heat-shrink sleeve and the heat oven to protect the splice point.
Details parameters like Template, Name, Focus, Arc Adjust, Pull Test, and Loss Estimate.
Procedures for replacing and stabilizing electrodes to ensure good splice results.
Running diagnostic tests, dust checks, and motor/arc calibration.
Lists common symptoms like axial offset, angle errors, bending, and their remedies.
Details various error messages from the splicer and provides step-by-step solutions.
To Next Page
